Dry block temperature calibrator for cost-effective thermometer calibration

CS and CSEC series thermometer probe calibration service [manufacturer of temperature calibration equipment]

Eurolec Dry block temperature calibrator

Eurolec Instrumentation is a market leading manufacturer of dry block temperature calibrators. The CS and CSEC series is a range of cost-effective and accurate temperature calibration sources for probe thermometers.

The portable dry block calibrators feature a range of temperature calibration sources. These are suitable for laboratory and on-site thermometer calibration. They cover temperatures ranging from -20°C to 650°C, which makes it suitable for a wide range of applications.

The dry well calibrators feature a PID Controller with a platinum film sensor which makes it reliable and accurate. The CS and CSEC Series thermometer probes comply with the ISO9001 and HACCP quality standards.

Contact Eurolec Instrumentation Ltd Request a Quote Request Documentation

The technical information of the CS series dry block temperature calibrator is:

Specification	CS173	CS174	CS174-IN	CS175	CS175-IN
Range	+30°C to +200°C	40°C below ambient to +85°C	40°C below ambient to +85°C	40°C below ambient to +85°C	40°C below ambient to +85°C
Accuracy	0.1°C	0.1°C	0.1°C	0.01°C	0.01°C
Emissivity	± 0.2°C ± 1 digit	± 0.2°C ± 1 digit	± 0.2°C ± 1 digit	± 0.05°C ± 1 digit	± 0.05°C ± 1 digit
Stability	Better than 0.03°C	Better than 0.03°C	Better than 0.03°C	Better than 0.03°C	Better than 0.03°C
Heating time	30°C to 150°C, 15 minutes	20°C to 60°C, 6 minutes	20°C to 60°C, 6 minutes	20°C to 150°C, 15 minutes	20°C to 150°C, 15 minutes
Cooling time	Non-forced	20°C to 0°C, 7 minutes	20°C to 0°C, 7 minutes	20°C to 0°C, 7 minutes	20°C to 0°C, 7 minutes
Power supply	110vAC or 220vAC	110vAC or 220vAC	110vAC or 220vAC	110vAC or 220vAC	110vAC or 220vAC
Operating temperature	+5°C to +40°C	+5°C to +40°C	+5°C to +40°C	+5°C to +40°C	+5°C to +40°C
Weight	4kg	4.2kg	4.2kg	4.2kg	4.2kg
Dimensions	196mm x 179mm x 180mm	196mm x 179mm x 180mm	196mm x 179mm x 180mm	196mm x 179mm x 180mm	196mm x 179mm x 180mm

The technical information of the CS high temperature series dry block temperature calibrator is:

Specification	CS350	CS650
Range	+30°C to +350°C	+30°C to +650°C
Accuracy	0.1°C	0.1°C
Emissivity	± 0.5°C 30°C to +350°C, ± 1°C to 200°C	± 0.5°C 30°C to +350°C, ± 1°C to 200°C
Stability	Better than 0.1°C	Better than 0.1°C
Heating time	15 minutes	25 minutes
Cooling time	Non-forced natural cooling	Non-forced natural cooling
Power supply	110vAC or 220vAC	110vAC or 220vAC
Operating temperature	+5°C to +40°C	+5°C to +40°C
Weight	5kg	6kg
Dimensions	253mm x 209mm x 180mm	253mm x 209mm x 180mm

The technical information of the CSEC series dry block temperature calibrator is:

Specification	CSEC1	CSEC2	CSEC3
Range	+30°C to +200°C	30°C below ambient to +85°C	30°C below ambient (minimum -10°C) to +105°C
Resolution	0.1°C	0.1°C	0.1°C
Accuracy	± 0.2°C ± 1 digit	± 0.2°C ± 1 digit	± 0.2°C ± 1 digit
Stability	Better than 0.03°C	Better than 0.03°C	Better than 0.03°C
Power supply	220vAC	110vAC or 220vAC	110vAC or 220vAC
Operating temperature	+5°C to +40°C	+5°C to +40°C	+5°C to +40°C
Weight	3kg	2.7kg	2.7kg
Dimensions	172mm x 164mm x 130mm	172mm x 164mm x 130mm	172mm x 164mm x 130mm