Ion Science - Portable PID sensor and gas detector manufacturer

Ion Science [Portable PID sensor and gas detector manufacturer]

Ion Science has been a PID sensor and gas detector manufacturer and supplier for more than 25 years.

Ion Science is independently verified as an expert in the field of photoionization detection (PID) technology. They are the world’s largest PID technology and instrument manufacturer.


The PID sensors by Ion Science are used by major, global gas detection manufacturers and is found inside many PID instruments for the detection of volatile organic compounds (VOCs).

Ion Science’s patented PID sensor technology combines the contamination prevention design with humidity resistance to provide accurate gas detection and measurement in harsh environments.

ISO9001:2015 certified, the PID sensor technology and instruments are designed, developed and manufactured in the UK and then distributed worldwide.

Ion Science is a PID sensor and gas detector manufacturer of Tiger, GasCheck and MVI products.

Tiger

Tiger has three portable PID sensors and gas detectors. Tiger VOC detector, Tiger LT VOC detector, Tiger Select benzene detector.

Tiger VOC detector

The Tiger VOC detector provides the widest measurement range and the fastest response time in the market. The VOC detector features 0 ppm – 20,000 ppm measurements with minimum sensitivity of 0.001 ppm (1 ppb).

The instrument detects over 480 VOCs and toxic compounds. The detector fulfils the ATEX, IECEx, UL and CSA standards.

The detector is easy to use and easy to upgrade. This feature makes the detector a reliable investment with the lowest operational cost in the market.

Tiger LT VOC detector

The Tiger LT is an economic variant of the VOC detector with all its essential features. The detector features 0 ppm – 5000 ppm VOC measurements with minimum sensitivity of 0.001 ppm (1 ppb). The instrument is intrinsically safe and fulfils the ATEX, IECEx, UL and CSA standards.

Tiger Select benzene detector

The benzene gas detector provides rapid and accurate detection of benzene and Total Aromatic Compound (TACs).

Tiger Select comes with a detachable benzene pre-filter tube. The tube ensures fast detection and the selective measurement of benzene. The pre-filter tube displays Benzene concentrations in parts-per-billion (ppb) levels for accurate and reliable data.

The detector is easy to use and upgrade.

GasCheck

GasCheck has two portable gas leak detectors. GasCheck G leak detector, GasCheck Tesla helium leak detector.

GasCheck G leak detector

The GasCheck G detector gas features an advanced system of micro thermal conductivity, which enables higher sensitivity in detecting gas leaks to cc/sec, mg/m3 or ppm levels. The detector can detect most gases and combination of gases.

The instrument is easy to use and upgrade.

GasCheck Tesla helium detector

The Tesla helium detector incorporates advanced micro thermal conductivity sensors. This feature enables the instrument to provide accurate measurement of helium leaks within the high magnetic field found outside of the Magnetic Resonance Imaging (MRI) scanners.

The GasCheck Tesla can be used whilst the MRI scanner is in operation, ensuring no interruption in the work flow. The detector is easy to operate and is designed to reach small spaces.

MVI – Mercury vapour detector

The MVI detector utilizes the dual beam UV absorption technology. This feature prevents saturation. It also removes the need for regeneration between reading.

The detector provides continuous readings of two detection ranges; 0.1 to 200 and 0.1 to 1999 microgram/cubic meter.

Economically designed the device is simple to use.

For more information about the PID sensor and gas detector manufacturer and their products, contact us now.


Contact IonScience

* required field